• Bringing the Best of both Air-Core
    & Iron-Core Reactor Technology
  • full screen sliderReactors for Solar Inverters
    & Wind Converters
  • Iron-Core Reactors for LV Power Quality Applications
  • MV Air-Core Reactors for Damping & Filtering Applications
image carousel by WOWSlider.com v6.8

Filter Reactors

The increasing presence of nonlinear loads and the widespread use of power electronic-switching devices in industrial power systems is causing an increase of harmonics in the power system. Filter Reactors are used in series with Capacitors to minimize the negative effect of harmonics on other power system components.

MV Air Core Filter reactors

MMIPL offers a wide range of Air-Core Filter Reactors to be used in medium voltage systems up to 36kV. The reactors could be either Single or Three Phase and are suitable for either Indoor or Outdoor Installation.

Depending on the requirement, the windings could be manufactured with Aluminium or Copper.Each reactor is designed using our customized software to ensure the most optimal design while meeting special customer requirements. The reactor windings consist of fibre-glass insulated Aluminium or Copper conductors wound either in single or multiple layers. In the case of multi-layered windings, the successive layers are separated by cooling ducts.

The reactors are mounted on support insulators to provide the insulation to ground and also to maintain the required magnetic clearances. Several mounting arrangements are available: the reactors can be panel-mounted, installed as individual single-phase units, side-by-side, or as three-phase stacks.